How to Replace the microSD Card in a Display Computer

Plant One Projector & Front or Rear TVs

Step 1: Locate the small computer that runs the software. PlantOne Projection systems and front or rear TVs use a small Raspberry Pi computer that is likely zip-tied to the TV or mounted nearby.

Step 2: Turn off the Raspberry Pi by unplugging its power cable. This is usually a USB cable.

Step 3: Locate and remove the existing microSD card. Some devices have a spring mechanism: push the card in slightly, and it will pop out. Other devices use a friction-fit slot, and the card can be removed with your fingernail.

Step 4: Insert the new microSD card into the same slot.

Push the card in until it is securely seated.

Step 5: Reconnect power and confirm that the device boots successfully before securing it in place.