269-815-4150 sales@enventek.com
Help Center
< All Topics

VC1 Replacement Software Steps


The replacement of a VC1 involves two main steps – Mechanical/Electrical and Software configuration. The Software step involves configuring the software to adapt the VC1 to your specific equipment.

  1. Go to Repair Tab -> Located the Component to replace the VC1 on. -> Enter the Settings -> Basic
  2. Enter the MAC address in the box and click Save to save the settings to the software.
  3. Initialize the VC1
  4. Restart the Software

Retro C

Linear PickLine

Table of Contents