Configure a Newer Computer to Power On After an Outage

Before You Begin

Record the current settings and any message shown on the screen before making changes. Close active jobs normally, and change only the settings identified in this article.

Press the Delete key while the computer is starting to enter the BIOS.

Navigate to “Chipset.”

Select “Restore AC Power Loss,” choose “Power On,” and press Enter to confirm.

Press F10 to save the changes and exit.

Confirm the Result

After checking all connections and reinstalling covers, restore power through the approved startup procedure. Confirm that the correct device comes online without a disconnected-drive or communication warning, then test its command, direction, and stopping response in a controlled mode.

If the issue remains, record the exact on-screen message, affected component, indicator-light state, and the last change made. Provide those details to Enventek Technical Support; do not repeatedly recalibrate or replace parts without identifying the cause.

Related Articles

• replace the display computer’s microSD card