How to Program a Replacement CFW Drive

Using the buttons on the touchscreen you will need to use program only 1 parameter and that is the corresponding drive number.

To get to the right area in the menu press the “enter” button once

Use the down arrow to the “Net” section & press enter

Use the up or down arrow to get to “308” & press enter

Next use the list below select and then program the correct ID# into this field

• Saw Blade #1 = 1
• Saw Blade #2 = 2
• Saw Blade #3 = 17
• Saw Blade #4 = 18
• Saw Blade #5 = 19

Press enter

Lastly go into the “repair” tab select the head or axis that you just installed the drive on. Press the “calibrate” button

Next locate the “VFD” tab and then the “Init” button press it once and the drive should be initialized and ready to use.