Cable Pull System (Emergency Stop)

The Cable Pull function is used to activate the Emergency Stop mode for the saw or conveyors.
When the cable is pulled or has excessive slack, the system will enter Emergency Stop mode.
It is essential to maintain the correct tension in the cable pull to ensure proper functionality.

To adjust the tension, an indicator with a red line and an arrow is provided. If the arrow is to the left of the red indicator, the cable needs to be tightened. Conversely, if the arrow is to the right, the cable should be loosened.

Once the cable has been pulled and the Emergency Stop mode is activated, it must be reset. This can be done by pressing the blue button located on the front of the cable pull switch.

By following these guidelines, you can effectively operate the Cable Pull and Emergency Stop function, maintaining the correct tension and ensuring the system operates safely and efficiently.