When wiring up the Stationary or Carriage panels this is how the wires are typically connected.

NOTE: Some VC1s may have additional wires in one or multiple slots.

Stationary & Carriage Panel

VFD

• Blue  → SG+
• White  → SG-
• Yellow  → ACM
• Orange  → AI1
• Green  → FWD
• Red  → REV
• Black  → DI3
• Brown  → DCM (Either one)

VC1

• Yellow → 0V
• Brown → 0V
• Orange → VOUT+
• White → RS485-
• Blue → RS485+
• Black → 03 (GND)
• Red → 02 (GND)
• Green → 01 (GND)

Pickline Panel

VC1

• Yellow → 0V
• Brown → 0V
• Orange → VOUT+
• White → RS485-
• Blue → RS485+
• Black → 03 (GND) (Only Used on DR4, NOT USED on DR1,DR2,DR3)
• Red → 02 (GND)
• Green → 01 (GND)