by Michael Bell | Aug 16, 2023 | Electrical System, Linear Pickline, VC1, Wiring
When wiring up the Stationary or Carriage panels this is how the wires are typically connected. NOTE: Some VC1s may have additional wires in one or multiple slots. Stationary & Carriage Panel VFD Blue → SG+ White → SG- Yellow → ACM Orange → AI1...
by Michael Bell | Jul 11, 2023 | E-Stop, Troubleshooting
If you are experiencing an issue with your Retro C where the “Countdown Timer” warning won’t go away, look at your “Check” tab. If it looks like this and none of your Stationary or Carriage VC1s or VFDs are connected this is what you...
by Michael Bell | Sep 19, 2022 | General
Install Ethernet to Serial “Brain Box “Step 1: Cut off the wall plug and strip the wires back. Step 2: Strip the wire and then wire it directly into the (+) and (-) terminals as shown in the image below. The wire that has white lettering/dashes goes to...