by Michael Bell | Sep 20, 2022 | Scrap System
The scrap belt support rollers are located on the underside of the Retro C. Their function is to support the belt as it travels under the saw. Their are six rollers on every Retro C, replacing one is pretty simple. Remove the two cotter pins that are on each end of...
by dalsond | Sep 19, 2022 | Scrap System
Locate the Scrap Motor The scrap motor and gearbox is located on the operator end of the machine. It is behind the enclosure that holds the VFDs for the scrap system. Scrap Motor Rewiring and connecting a new motor Replacing this motor is fairly simple, there are just...
by dalsond | Sep 18, 2022 | VFD
Due to the microchip shortage in version 1.60 of the Retro C software Enventek has significate changes in order to support multiple types of VFDs (Variable Frequency Drives). This comes at a time when our main supplier of VFD’s retired a product and new products are...
by dalsond | Sep 18, 2022 | Material Feed System
Location The material feed encoders are located inside the extended fan cover of the motor that runs the dogs through the saw. NOTE: The encoders work to synchronize the two sides of the Retro C. If the saw loses synchronization or stalls it could be something...
by dalsond | Aug 11, 2022 | Horizontal Conveyors
Tools Needed: Phillips Head Screwdriver, 3/8” Socket Wrench Time: 10 min People: 1 Step 1: Locate the rotary encoder on the rear of the saw that you need to replace. NOTE: There are two encoders, one for each side (even though only one is shown here). You will need to...
