by Michael Bell | Sep 20, 2022 | Scrap System
Realignment of the scrap belt can be a tedious process. The first rule of belt tracking: The belt tracks to the side with the least tension. That rule applies to both ends of the belt conveyor. The Second rule of belt tracking: If the belt is not tight enough it...
by Michael Bell | Sep 20, 2022 | Blades
This article will discuss the steps you should take if you suspect one or more of your blades are out of alignment. Maybe you have “crashed” a blade or blades into a board or maybe one of the blades has become misaligned over time (not common). This...
by dalsond | Aug 11, 2022 | Carriage System
Checking the saw alignment, while not difficult, needs to be done in the correct order to realign. If the carriage moves during the cutting process it means one of two things. Either the Carriage air brake is not holding or the material feed conveyors are not parallel...