by Michael Bell | Sep 27, 2022 | Centerlines
The centerline encoder is the counter that tracks the position of the vertical movement. Warning: Before entering the saw make sure you have engaged the emergency stop with the key and take it with you as well. Always lock out, tag out the machine during maintenance...
by Michael Bell | Sep 27, 2022 | Centerlines
Warning: Before entering the saw make sure you have engaged the emergency stop with the key and take it with you as well. Always lock out, tag out the machine during maintenance in accordance with all local and/or company policies. The purpose of this article is to...
by Michael Bell | Sep 27, 2022 | Centerlines
Centerlines are saw blade movements on the Y Axis (vertical movements – up & down). All Retro C component saws contain one of two versions depending on the generation of the saw. Version 1 is the Joyce Actuator which is an enclosure screw that moves up and...
by Michael Bell | Sep 27, 2022 | Angles
The Angles or Arches are the movements that pivot the blade motors to angle. That is done with a semi circular arch, 50-2 chain gearbox, motor and encoder. The gearbox for the angle movement is a hollow shaft gearbox with a shaft and sprocket to drive the number 50-2...
by Michael Bell | Sep 26, 2022 | Blades
Supplies Needed Torque Wrench or Ratchet with 20ft lb. settingT40 TORX BIT Warning: Before entering the saw make sure you have engaged the emergency stop with the key and take it with you as well. Always lock out, tag out the machine during maintenance in accordance...
