by Michael Bell | Sep 26, 2022 | Blades
Supplies Needed Torque Wrench or Ratchet with 20ft lb. settingT40 TORX BIT Warning: Before entering the saw make sure you have engaged the emergency stop with the key and take it with you as well. Always lock out, tag out the machine during maintenance in accordance...
by Michael Bell | Sep 21, 2022 | Troubleshooting
On all of the movements the encoder unplugged indicates that the encoder wiring, connections or the encoder has failed. Inspect the ethernet cable for damage.Get a test cable to replace the ethernet cable if there is damage.Check for sawdust, dirt or debris in the...
by Michael Bell | Sep 21, 2022 | UPS
Battery Control Module PSM24-BCM360S Pinout
by Michael Bell | Sep 21, 2022 | Overviews
If you would like a downloadable copy of the Retro C schematics that shipped with the saw please call technical support at (269) 815-4150
by Michael Bell | Sep 20, 2022 | Scrap System
Realignment of the scrap belt can be a tedious process. The first rule of belt tracking: The belt tracks to the side with the least tension. That rule applies to both ends of the belt conveyor. The Second rule of belt tracking: If the belt is not tight enough it...
