by dalsond | Aug 11, 2022 | Carriage System
The Material feed conveyors which feed lumber through the saw must be parallel to each other. A way to check that is to take a piece of lumber an run it until the lumber enters the saw before the blades. Once in that location stop the saw and put a vertical mark on...
by dalsond | Jun 2, 2022 | Horizontal Conveyors
Purpose The goal is to explain how to replace the 3/4 shaft on a horizontal conveyor when after it has been bent due to lumber buildup or jams. Tool List 3/8 Deep Socket3-inch ExtensionRatchet driverPhillips Screwdriver9mm Wrench3/16 Allen Wrench1.5mm Allen Wrench1/8...
