by Michael Bell | Oct 23, 2023 | Centerlines
There are a number of reasons you might need to recalibrate your centerline. The most common reasons are: Older Retro C saws use screw drive centerlines that tended to fade down more often than our newer chain drive systems. Loss of power while the saw head was...
by Michael Bell | Oct 23, 2023 | Centerlines
There are a number of reasons you might need to recalibrate your centerline. The most common reasons are Older Retro C saws use screw drive centerlines that tended to fade down more than our latest chain drive systems. Loss of power while the saw head was moving....
by Michael Bell | Sep 29, 2022 | Material Feed System
The lumber guide wheel is the final point of adjustment for the lumber before it is cut. The guide wheels job is to position the lumber so that it is inline with saw blade 1 and 2. If you find that the lumber isn’t being cut at all (the wheel is pushing the...
by Michael Bell | Sep 29, 2022 | Scrap System
If the scrap belt is slipping on the roller or not staying centered manual adjustment is required. Step 1: Remove the gray chain guard so you have more room to work. There are two bolts on the right side of the cover that hold it in place. Once the bolts are removed...