by Michael Bell | Aug 15, 2023 | Cart Puller, SpeedCatch
Please follow the step below to make sure that the encoder isn’t slipping Step 1: Remove the encoder’s protective cover Step 2: Check the set screw or collar (depending on which style encoder you have) and make sure they are not loose. Style 1: Style 2:...
by Michael Bell | Jun 9, 2023 | Angles
The angle chain need to be periodically checked to maintain proper chain tension. Proper chain tension will allow it move slightly from side to side but not so much that it becomes floppy or is able to move significant amounts, conversely you don’t want it so...
