by Michael Bell | Nov 21, 2022 | Brakes
Section 1: Tightening the Retro C’s Airbrake Step 1: Manually unlock the blade brakes in the “manual controls” section of the Retro C software. Step 2: Disconnect the air hose from the saw. Step 3: Verify that the saw has automatically engaged the...
by Michael Bell | Sep 29, 2022 | Scrap System
If the scrap belt is slipping on the roller or not staying centered manual adjustment is required. Step 1: Remove the gray chain guard so you have more room to work. There are two bolts on the right side of the cover that hold it in place. Once the bolts are removed...
by Michael Bell | Sep 27, 2022 | Centerlines
Warning: Before entering the saw make sure you have engaged the emergency stop with the key and take it with you as well. Always lock out, tag out the machine during maintenance in accordance with all local and/or company policies. The purpose of this article is to...