by Michael Bell | Jul 27, 2023 | General
If a sensor malfunctions and is constantly sensing in the on or off position, you may need to simply “re-teach” the sensor. This is very easy to do and should take 5 minutes or less. The sensor diagnostics is under the Sensors tab. This is located in the...
by dalsond | Jun 9, 2023 | General, General
The Front Conveyor sensor is utilized on both the SmartConveyor and the front conveyor of the Linear Pickline. Additionally this sensor is the same one as the Retro C entry sensor. To determine whether the sensor is turned on, check if both lights are illuminated....
by dalsond | Mar 26, 2023 | General
The Linear Pickline has the ability to work with other types of saws from nearly any manufacturer through the implementation of an integrated sensor array. The Linear Pickline’s sensor array will detect if a board is removed from one or more of the sensors and...
by dalsond | Sep 18, 2022 | Material Feed System
The Retro C is equipped with sensors that are constantly detecting the position of the lumber as it is loaded onto the material feed arms. As lumber passes by the sensors they measure the position of the board on each side to make sure that the board is not crossed...