by Michael Bell | Jan 23, 2023 | Angles
Step 1: Remove the blue metal shroud that protects the angle encoder. There are (4) 9/16″ bolts that you will need to remove. Step 2: Inspect the encoder for anything that could cause the encoder to malfunction. One or both of the metal tabs/clips that hold the...
by dalsond | Jan 23, 2023 | General
Note: Certain conditions, including damp environments or certain types of wood (SYP), may require extra cleaning and lubrication, adjust as necessary. Lubrication: Use a mixture of motor oil and kerosene (1:16) to clean out excessive resin buildup and lubricate. Very...
