by Michael Bell | Aug 2, 2023 | Scrap System
Step 1: Go to the VFD that controls the Scrap Conveyor (DR30) or the Scrap Incline (DR31), both are located in the scrap enclosure and take the front plastic cover off. Use a single strand of ethernet wire (color doesn’t matter) to connect the “DCM”...
by Michael Bell | Jun 13, 2023 | Troubleshooting
A customer called and stated that after hitting the E-Stop that both of the VFDs for the Scrap Incline & Scrap Belt were disconnected (Yellow). Steps Taken Restart VC1 – No Change Restart Saw – No Change Unplug the RJ11 jack from VFD 30 – No...