by Michael Bell | Oct 6, 2022 | Horizontal Conveyors, Troubleshooting
If you find that one or more of the horizontals don’t move in or out anymore you more than likely have one of two issues. Issue 1: Saw dust has built up in the Horizontals and is stopping the movement. Solution: Use compressed air to blow out the Horizontal...
by dalsond | Aug 11, 2022 | Horizontal Conveyors
Tools Needed: Phillips Head Screwdriver, 3/8” Socket Wrench Time: 10 min People: 1 Step 1: Locate the rotary encoder on the rear of the saw that you need to replace. NOTE: There are two encoders, one for each side (even though only one is shown here). You will need to...
by dalsond | Jun 2, 2022 | Horizontal Conveyors
Purpose The goal is to explain how to replace the 3/4 shaft on a horizontal conveyor when after it has been bent due to lumber buildup or jams. Tool List 3/8 Deep Socket3-inch ExtensionRatchet driverPhillips Screwdriver9mm Wrench3/16 Allen Wrench1.5mm Allen Wrench1/8...