by Michael Bell | Feb 7, 2023 | Centerlines
It is very rare that a gearbox will go bad but if that does happen or you are upgrading to one of our newer 100-1 gearboxes this article will instruct you on how to replace yours. Step 1: Remove Blade or Blades (OPTIONAL) We recommend removing the blade or blades that...
by Michael Bell | Sep 27, 2022 | Centerlines
Centerlines are saw blade movements on the Y Axis (vertical movements – up & down). All Retro C component saws contain one of two versions depending on the generation of the saw. Version 1 is the Joyce Actuator which is an enclosure screw that moves up and...
