by Michael Bell | Oct 1, 2024 | Scrap System
After you have the 3rd VFD installed, powered on and wired up correctly, you will need to program these settings into the VFD using the up down arrows on the VFD itself. Wiring: Aside from the other power wires to and from the fuses and motor please make sure these...
by Michael Bell | Sep 21, 2022 | VFD
The main reason for a Drive disconnect would be. Power Wire between the VC1 and the VFD is disconnected Faulty or misconfigured VFD Faulty VC1 Power Check if there is power to the VFD (Drive) if there is no power then the check screen will show disconnected. Most of...
