by Michael Bell | Sep 27, 2022 | Centerlines
When doing calibration on a saw head one of the things you will need to do is verify the max and min values. The Centerline moves up and down via a motor and chain and is only stopped because the motor mount bracket can’t move any more because it is stopped by the saw...
by Michael Bell | Sep 27, 2022 | Centerlines
The centerline encoder is the counter that tracks the position of the vertical movement. Warning: Before entering the saw make sure you have engaged the emergency stop with the key and take it with you as well. Always lock out, tag out the machine during maintenance...
by Michael Bell | Sep 27, 2022 | Centerlines
Warning: Before entering the saw make sure you have engaged the emergency stop with the key and take it with you as well. Always lock out, tag out the machine during maintenance in accordance with all local and/or company policies. The purpose of this article is to...
by Michael Bell | Sep 27, 2022 | Centerlines
Centerlines are saw blade movements on the Y Axis (vertical movements – up & down). All Retro C component saws contain one of two versions depending on the generation of the saw. Version 1 is the Joyce Actuator which is an enclosure screw that moves up and...
