by Michael Bell | Jun 9, 2023 | Angles
The angle chain need to be periodically checked to maintain proper chain tension. Proper chain tension will allow it move slightly from side to side but not so much that it becomes floppy or is able to move significant amounts, conversely you don’t want it so...
by Michael Bell | Nov 21, 2022 | Brakes
Section 1: Tightening the Retro C’s Airbrake Step 1: Manually unlock the blade brakes in the “manual controls” section of the Retro C software. Step 2: Disconnect the air hose from the saw. Step 3: Verify that the saw has automatically engaged the...
by Michael Bell | Sep 27, 2022 | Centerlines
Warning: Before entering the saw make sure you have engaged the emergency stop with the key and take it with you as well. Always lock out, tag out the machine during maintenance in accordance with all local and/or company policies. The purpose of this article is to...
