by Michael Bell | Aug 22, 2023 | SpeedCatch
In each upgrade kit we include: (2) Bridge Brackets (2) Flipper Extension Brackets...
by Michael Bell | Aug 15, 2023 | Cart Puller, SpeedCatch
Please follow the step below to make sure that the encoder isn’t slipping Step 1: Remove the encoder’s protective cover Step 2: Check the set screw or collar (depending on which style encoder you have) and make sure they are not loose. Style 1: Style 2:...
by Michael Bell | Aug 14, 2023 | Cart Puller
In the image below you will see the approximate location of the Cart hook calibration point. Note this on the Fixed end of the RetroC The hook calibration point is to the end of the “Blue tube” on the Fixed End Carriage (shown below). Place a mark on the...
