by Michael Bell | Jul 27, 2023 | General
If a sensor malfunctions and is constantly sensing in the on or off position, you may need to simply “re-teach” the sensor. This is very easy to do and should take 5 minutes or less. The sensor diagnostics is under the Sensors tab. This is located in the...
by dalsond | Jun 9, 2023 | General, General
The Front Conveyor sensor is utilized on both the SmartConveyor and the front conveyor of the Linear Pickline. Additionally this sensor is the same one as the Retro C entry sensor. To determine whether the sensor is turned on, check if both lights are illuminated....
by Michael Bell | Jun 9, 2023
Periodically checking the chain tension of your SmartConveyor(s) is normal and recommended. This article will go over the basics of how to adjust the tension and how to determine if it needs to be tightened or loosened Step 1: Is to assess the chain tension. If the...
