by dalsond | Sep 18, 2022 | VFD
Due to the microchip shortage in version 1.60 of the Retro C software Enventek has significate changes in order to support multiple types of VFDs (Variable Frequency Drives). This comes at a time when our main supplier of VFD’s retired a product and new products are...
by dalsond | Sep 18, 2022 | Material Feed System
Location The material feed encoders are located inside the extended fan cover of the motor that runs the dogs through the saw. NOTE: The encoders work to synchronize the two sides of the Retro C. If the saw loses synchronization or stalls it could be something...
by dalsond | Aug 11, 2022 | Horizontal Conveyors
Tools Needed: Phillips Head Screwdriver, 3/8” Socket Wrench Time: 10 min People: 1 Step 1: Locate the rotary encoder on the rear of the saw that you need to replace. NOTE: There are two encoders, one for each side (even though only one is shown here). You will need to...
