by Michael Bell | Jun 27, 2023 | VFD
The following pictures are examples of how we wire up each VFD currently. VFDs DR12 & DR13 (In the Stationary Enclosure) VFDs DR4 & DR5 (In the Stationary Enclosure) VFDs DR6 & DR7 (In the Stationary Enclosure) VFD DR1 (In the Stationary Enclosure) VFD DR2...
by Michael Bell | Jun 27, 2023 | Angles, Wiring
Power for each movement that the saw makes will follow this general path. VFD (in) VFD (out) Terminal Block in # (Example 46) Terminal Block out # (Example 46) (the number will be the same as “in”) Motor VFD in wires are the two or three wires on the left...
by Michael Bell | Feb 13, 2023 | Computer
From the factory, our computers are initially set to power on after an unexpected loss of power. However, it is important to note that this setting can sometimes revert back to the default setting established by the motherboard manufacturer, which is to remain turned...
