by dalsond | Jun 9, 2023 | General, General
The Front Conveyor sensor is utilized on both the SmartConveyor and the front conveyor of the Linear Pickline. Additionally this sensor is the same one as the Retro C entry sensor. To determine whether the sensor is turned on, check if both lights are illuminated....
by dalsond | Mar 26, 2023 | General
The Linear Pickline has the ability to work with other types of saws from nearly any manufacturer through the implementation of an integrated sensor array. The Linear Pickline’s sensor array will detect if a board is removed from one or more of the sensors and...
by Michael Bell | Sep 19, 2022 | General
Linear Pickline Installation Requirements 1.Information needed by Enventek The following information needs to be emailed back to Enventek promptly so that the saw can be made to fit your specifications. What is the conveyor length needed to fit your layout? See...
by Michael Bell | Sep 19, 2022 | General
Install Ethernet to Serial “Brain Box “Step 1: Cut off the wall plug and strip the wires back. Step 2: Strip the wire and then wire it directly into the (+) and (-) terminals as shown in the image below. The wire that has white lettering/dashes goes to...
