by dalsond | Jan 23, 2023 | Angles
Angles can overrun when moving to position due to a couple of reasons. An encoder that is partially connected and allows the movement to hunt and then eventually find the postion. Check the encoder for that movement. The movement gets stuck and builds up power trying...
by Michael Bell | Sep 20, 2022 | Carriage System
Retro C: Carriage Movements Stalling & or Hunting If you notice that the Retro C carriage is stalling or hunting around at the end of a movement here are the steps that to take to resolve this issue. Step 1: Clean dust from the GearRack Step 2: Confirm that the...