by Michael Bell | Feb 7, 2023 | Centerlines
It is very rare that a gearbox will go bad but if that does happen or you are upgrading to one of our newer 100-1 gearboxes this article will instruct you on how to replace yours. Step 1: Remove Blade or Blades (OPTIONAL) We recommend removing the blade or blades that...
by Michael Bell | Sep 19, 2022 | General
Install Ethernet to Serial “Brain Box “Step 1: Cut off the wall plug and strip the wires back. Step 2: Strip the wire and then wire it directly into the (+) and (-) terminals as shown in the image below. The wire that has white lettering/dashes goes to...
