by Michael Bell | Sep 20, 2022 | Angles
If you are experiencing constant or persistent noises coming from one of your blade motors the cause is typically one of three things. Reason Number 1: The (normally blue) shroud that covers the encoder is vibrating and you are hearing the noise of metal on metal as...
by Michael Bell | Jun 13, 2022 | VFD
Programing a Yaskawa V1000 Drive There are likely 5 Yaskawa V1000s on your Retro C, (2) on the stationary side and (3) on the carriage side. Each Yaskawa V1000 talks to a VC-1 and has its own specific address and that is what we are going to be programing into the...